HFK 90 S 40 C

HFK 90 S 40 C - Drawing No. 090S40B-01-
HFK 90 S 40 C - Drawing No. 090S40B-01-
Drawing
Diagram
STEP-File
Standard Option
S

The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

Additional Options
CC

High Performance Ceramic Hybrid Ball Bearings

The motor spindle is built with High Performance Ceramic Hybrid Ball Bearings. Option "CC" increases spindle maximum speed. Note the motor diagram for details.

G

Antistatic Brushes

Option "G" avoids a static overload due to processing and friction on non- conducting materials..

L

Oil Extraction

The motor spindle has an oil extraction system to vacuum excess oil. Option "L" reduces excess oil drops on the work piece.

R

Hydraulic preload for higher axial stiffness

Option "R" enables a flexible hydraulic preload of the spindle shaft while running the process. This allows high force in the process if needed, but spindle maximum speed when it’s possible.

V

Encoder for Vector Control and Shaft Positioning

The integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details.

Speed

Oil-Air (min-1)60'000
CC-Grease (min-1)50'000
Grease (min-1)42'000
PowerS6-40% (kW)2.990
S1 (kW)2.300
TorqueS6-40% (Nm)0.481
S1 (Nm)0.370
Tooling system Typ ER 16-UP
Frequency(Hz) 1'000
Voltage(V) 380
Current(A) 5
Bearings(Pce.)
Housing Diameter(mm)90
Spindle length(mm)209
Spindle weight (g) 6'150
Way of cooling
Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C.
Alternative tooling systems ,